The details are as follows.Serpentine belt also known as drive belt or Accessory belt.
Belts are made of reinforced synthetic and/or hard rubber, belts are usually v-channeled or ribbed serpentine They're used to drive accessories including the alternator, water pump, AC compressor, power steering, air pump, vacuum pump and injector pump. They're usually driven by the engine's crankshaft pulley and are fully adjustable by tensioners or idlers that follow or track the surface of the belt.
The diagrams are for both,with and without AC models.The belt tension should be absolutely right.Not too loose or over tight.Adjust the belt tensioner correctly.Also inspect that all pulleys from where belt routes ,are proper and not worn out.
The belt route diagrams for all engines with its engine model is as follows :-----
Remove the cooling fan.
Remove the 4 bolts and cooling fan stator.
Rotate the drive belt tensioner clockwise and remove the accessory drive belt.
To install, reverse the removal procedure. Tighten the stator bolts to 40 Nm (30 ft. lbs.).
choose the correct one for your application:
2004 Ford Truck F450 Super Duty P/U 4WD 6.0L Turbo Diesel 8cyl
Fig. Accessory drive belt routing-4.6L, 5.4L and 6.8L engines with A/C
Fig. Accessory drive belt routing-4.6L, 5.4L and 6.8L engines without A/C
Fig. Supercharger drive belt routing-5.4L engines
Fig. Accessory drive belt routing-5.4L supercharged engines
This detailed diagrams will help you.
----------
Timing belt routing diagrams for cars and trucks? Click the link below:---http://technoanswers.blogspot.com/2011/10/timing-belt-routing-diagrams-for-cars.html
Drive belt routing diagrams for cars and trucks? Click this link below:---http://technoanswers.blogspot.com/2011/10/drive-belt-routing-diagrams-for-cars.html
Belts are made of reinforced synthetic and/or hard rubber, belts are usually v-channeled or ribbed serpentine They're used to drive accessories including the alternator, water pump, AC compressor, power steering, air pump, vacuum pump and injector pump. They're usually driven by the engine's crankshaft pulley and are fully adjustable by tensioners or idlers that follow or track the surface of the belt.
The diagrams are for both,with and without AC models.The belt tension should be absolutely right.Not too loose or over tight.Adjust the belt tensioner correctly.Also inspect that all pulleys from where belt routes ,are proper and not worn out.
The belt route diagrams for all engines with its engine model is as follows :-----
Remove the cooling fan.
Remove the 4 bolts and cooling fan stator.
Rotate the drive belt tensioner clockwise and remove the accessory drive belt.
To install, reverse the removal procedure. Tighten the stator bolts to 40 Nm (30 ft. lbs.).
choose the correct one for your application:
2004 Ford Truck F450 Super Duty P/U 4WD 6.0L Turbo Diesel 8cyl
Fig. Accessory drive belt routing-4.6L, 5.4L and 6.8L engines with A/C
Fig. Accessory drive belt routing-4.6L, 5.4L and 6.8L engines without A/C
Fig. Supercharger drive belt routing-5.4L engines
Fig. Accessory drive belt routing-5.4L supercharged engines
This detailed diagrams will help you.
----------
If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.
Timing belt routing diagrams for cars and trucks? Click the link below:---http://technoanswers.blogspot.com/2011/10/timing-belt-routing-diagrams-for-cars.html
Drive belt routing diagrams for cars and trucks? Click this link below:---http://technoanswers.blogspot.com/2011/10/drive-belt-routing-diagrams-for-cars.html
No comments:
Post a Comment